Starfighter

joined 2 years ago
[–] [email protected] 1 points 11 months ago

Chevron 7 eingesperrt

[–] [email protected] 20 points 11 months ago (2 children)

Always mocking Dr. Daniel Jackson. Poor guy

[–] [email protected] 5 points 1 year ago

Additional information regarding Home Assistant:

The sun component (which should be enabled by default) already computes the sun position for you.

Elevation and azimuth are available as standalone sensors sensor.sun_solar_azimuth (might be disabled by default) or as attributes on the sun.sun entity.

[–] [email protected] 9 points 1 year ago* (last edited 1 year ago) (1 children)

Not an expert but these systems are fairly self-contained and robust. A few things that can be checked easily is that the fan spins, the radiator is free of debris and some compressors might have a sight glass for the oil level.

Any other checks regarding performance of the system, leaks and refrigerant level require you to perform a full refrigerant discharge and recharge. That takes special equipment and some time so no one in their right mind would do that for free, unless they can then force/guide you into some kind of upsell situation.

Larger systems might have some kind of oil filter/catch-can that you might be able to check easily but I'm not too sure on that.

After all heat pumps are just plain old A/C units with a reversible cycle.

[–] [email protected] 1 points 1 year ago (1 children)

I don't have any experience with it but this might do something along those lines(?):

https://esphome.io/components/binary_sensor/ble_presence.html

Seems like you can just add it to one or more of your existing esphome devices.

[–] [email protected] 8 points 1 year ago

Cushy is an experimental Graphical User Interface (GUI) crate for the Rust programming language. It features a reactive data model and aims to enable easily creating responsive, efficient user interfaces. To enable easy cross-platform development, Cushy uses its own collection of consistently-styled Widgets.

[–] [email protected] 14 points 1 year ago* (last edited 1 year ago) (1 children)

Und an dem Punkt könnte man die Routen und Fahrzeiten dieser Fahrzeugverbände zentral steuern, damit sie immer grüne Welle haben.

Dieses Werk könnte man zB ein Stell-Center nennen.

[–] [email protected] 5 points 1 year ago* (last edited 1 year ago) (1 children)

The 44.1% battery failure figure is regarding the "starter" battery (12V) and is combined from all vehicles in the study (EV and ICE).

The HV Battery for the traction drive is grouped together with any kind of motor failure and comes in at 22.8 %. But this figure also includes ICE vehicles ejecting piston rods etc.

The only EV vs ICE numbers stated directly are the total breakdowns per 1000 vehicles at 1.9 (EV) and 3.6 (ICE).

I'd be really interested in a chart showing the failure categories separated by EV and ICE.

[–] [email protected] 17 points 1 year ago* (last edited 1 year ago)

I could only find the Model 3 in their statistic.

  • Year of registration: Breakdowns per 1000 vehicles
  • 2021: 1.0
  • 2020: 1.3
  • 2019: 4.0

The best value for 2021 is 0.8 by the Audi A4 and A5, whilst the worst is the Toyota RAV4 with 17.6.

Overall they rank the Model 3 with "very low" and "low" rate of failure.

Granted these cars are still pretty young so who knows what that figure will look like in 5 or 10 years.

[–] [email protected] 6 points 1 year ago* (last edited 1 year ago) (1 children)

For context they seem to be specifically referencing the 12V "starter" battery not the HV battery used for the traction drive in EVs with that 44.1% figure. Additionally this figure seems to include all vehicles in the statistic, so some part of that is contributed by ICE vehicles.

[–] [email protected] 23 points 1 year ago* (last edited 1 year ago) (1 children)

Dr. med. Maurice Cabanis (einer der Experten) ist schon ein bisschen sus

view more: ‹ prev next ›