Flexaris

joined 2 years ago
sorted by: new top controversial old
My brand new bike is losing 2-5psi per day in the tires. Is this normal or should I be concerned? in c/motorcycles@lemmy.world
[–] Flexaris@discuss.tchncs.de 2 points 1 week ago (2 children)

Is it because you're checking every day and letting out a little each time?

‘They cannot be jammed’: fibre optic drones pose new threat in Ukraine in c/world@lemmy.world
[–] Flexaris@discuss.tchncs.de 19 points 3 months ago (2 children)

If they're up to 20 km it could take you a while and they're very small and difficult to see, possibly going through difficult terrain.

Franska oron: Gripens motor är ett ”problem” in c/sweden@lemmy.world
[–] Flexaris@discuss.tchncs.de 8 points 3 months ago (3 children)

Betalvägg :(

Organ transplant patient in Michigan dies from rabies in c/news@lemmy.world
[–] Flexaris@discuss.tchncs.de 5 points 4 months ago

The moment you start blaming yourself..

Texas Instruments Introduces MSPM0C1104 as the Smallest Available Microcontroller in c/microcontrollers@lemux.minnix.dev
[–] Flexaris@discuss.tchncs.de 9 points 4 months ago (2 children)

Not something I would try to hand-solder. Not something that feels relevant for me as a hobbyist either, although it's very cool.

Here’s what NASA would like to see SpaceX accomplish with Starship this year in c/spacex@sh.itjust.works
[–] Flexaris@discuss.tchncs.de 6 points 6 months ago

25 launches in '25 is not going to happen. I wonder how the FAA feels about having to divert aircraft after the ship was lost and what delay that will bring. It's going to be fun to see the development beyond the suborbital flights though.

So uhh, why does "Warning: Cancer and reproductive harm." appear at the bottom of the DKCHD store page? LMAO in c/nintendo@lemmy.world
[–] Flexaris@discuss.tchncs.de 8 points 6 months ago

The game is cancer and you won't find a partner if you play it?

Do you overthink your Steam categories or are you normal? in c/adhd
[–] Flexaris@discuss.tchncs.de 15 points 6 months ago

You can have categories?!

Connections #573 2025-01-04 in c/dailygames@lemmy.zip
[–] Flexaris@discuss.tchncs.de 5 points 6 months ago* (last edited 6 months ago) (5 children)

Connections Puzzle #573 🟦🟦🟦🟦 🟩🟩🟩🟩 🟨🟨🟨🟨 🟪🟪🟪🟪

Connections #572 2025-01-03 in c/dailygames@lemmy.zip
[–] Flexaris@discuss.tchncs.de 4 points 6 months ago

I didn't have too much trouble.

spoilerClams might be from the Flintstones and I know I've heard it used for money. I had a hunch then that smacker was also money but had too search to be sure.

Connections #571 2025-01-02 in c/dailygames@lemmy.zip
[–] Flexaris@discuss.tchncs.de 3 points 6 months ago (3 children)

Too America-centric for me today

Stopp för kläder i hushållssoporna – så påverkas du av nya lagen in c/sweden@lemmy.world
[–] Flexaris@discuss.tchncs.de 1 points 6 months ago (1 children)

Vad är då syftet med lagen? Varför är det inte bara en rekommendation?

5
Flashing custom FTDI board (discuss.tchncs.de)
 

I'd like to know if anyone has succesfully flashed a board using their own FTDI chip and not a commercial debug probe.

I want to get into using Rust and I have these STM-based boards where I put an FTDI chip on them so I get a convenient USB-port for power and debug and flashing. I'd really like to get some Rust-software running but I've just hit walls so far with flashing the boards. They work fine when using platformio/openocd and C++ but nothing has worked so far for using "cargo embed" even though it seems to find the FTDI chip correctly and start flashing but then times out.

I'd love to know if anyone has a similar setup working or can give tips on what I could try.

9
Hovrätten ger Transportstyrelsen prövningstillstånd (www.svt.se)
7
[Ender 3 S1] Changing heatbreak PTFE (discuss.tchncs.de)
 

I'm changing the PTFE in my heatbreak, I didn't realize these seem to be consumables. It started causing blockage.

A guy sent me a piece of PTFE from his Prusa MK3S+ that I could try as i was having trouble finding any PTFE quickly.

I realized I couldn't just cut a piece and put it in, that caused a lot of filament leakage and underextrusion. The end of the PTFE toward the nozzle was a bit jagged and I believe that's where the leakage happened. Now I'm wondering how the heatbreak and nozzle normally interface inside the heatblock, should they be touching? Should the PTFE protrude a bit from the heatbreak so there's a bit of pressure against the nozzle when I screw it in?

0
How do "most popular" filters work in online stores (discuss.tchncs.de)
 

I'll sometimes filter based on "most popular" and the result will be that the top item is som expensive thing that makes me wonder if it's really the most popular. It seems obvious that this might just be a way for the store to manipulate buyers. Does anyone have insight into how these work and is there any real function behind them?

30
Bodes Galaxy (discuss.tchncs.de)
 

This was the last object I worked on before I took a break. I think I got a total of about 8 hours of HaRGB. I used an NEQ6 mount and William Optics Zenithstar 73

view more: next ›