31ank

I currently print TPU 90A with my Anycubic Vyper and it works great even thou it's a bowden setup. It's IMO a great material if you need something that is kinda soft, you should really try it out! But from what I read the MMU doesn't really like TPU, but I think there are multiple versions of the MMU so maybe the newer ones are capable of handling TPU? Gonna check that again.

Also I thought I read somewhere that TPU/PLA didn't have the same problems like PETG/PLA or PLA/ABS/ASA, but I will check it again. Thanks for the input!

I have access to a BambuLab P1S at work and it's so much faster and produces better quality prints than my Anycubic Vyper, it's astonishing what happened the last view years thanks to CoreXY. I will check out the Elegoo, thanks for the recommendation!

Thanks, didn't knew about the Qidi. And even thou its 1k€/$, its still a half the price of the BambuLab or Prusa!

lol that network switch question xD

Pain didnt knew that, guess I'm switching back to Qwant, thanks for the info!

I mainly use Startpage, also a ~~european~~ search engine (like qwant it uses microsoft/google search in the backend)

Edit: as nuko pointed out: they are owned by an american company

Does someone has a link to the story? What happend?

It heavily depends on the material if it will print fine at higher humidity, but having around 20-35 seems good afaik. I printed PLA successfully at around 55% for a long period before switching rooms and never had problems, but I wouldnt store PETG/TPU there without a sealed box

Whats wrong with the prusa? Considering getting one

Some found out that the camera feed isn't e2e encrypted (eufy claimed they were) so you could see other people cameras

Dont know if it will work, but I think it's worth a try. If it doesn't work you can reset it or swap it back