lemming741

joined 2 years ago
[–] [email protected] 3 points 1 hour ago (1 children)

I stopped reading when you suggested 20 gauge was heavier than 18 gauge.

Rookie mistake you can't come back from.

[–] [email protected] 10 points 5 hours ago* (last edited 5 hours ago) (1 children)

Gerrymander secretary of state race
Geryrmander governor race
Gerrymander state Senate and house races
Pass disenfranchisement rules and laws
...?
Profit

https://en.m.wikipedia.org/wiki/Brian_Kemp

[–] [email protected] 3 points 2 days ago

Twenty and Balatro Sometimes Rummy or Blokus

[–] [email protected] 2 points 4 days ago (2 children)

I'd call that the Dispenser Lever but I doubt you'll find one. You may find a whole dispenser, but I would be prepared to epoxy the old one back together.

[–] [email protected] 17 points 4 days ago

The cap on the Washington Monument is aluminum because it was so precious in 1884, comparable to silver.

https://evolutiondc.museum.gwu.edu/the-washington-monument-capstone/

[–] [email protected] 2 points 4 days ago

Oops- used a 16 bit counter and it keeps rolling over before the limit

[–] [email protected] 11 points 5 days ago* (last edited 5 days ago) (2 children)

Three point four percentage points. Not great. Not terrible.

[–] [email protected] 3 points 6 days ago

I say home server when I'm talking to normies.
When I'm talking to geeks I say forbidden router
https://www.level1techs.com/video/level1-presents-forbidden-router

[–] [email protected] 3 points 6 days ago

All I see is ********

[–] [email protected] 1 points 6 days ago* (last edited 6 days ago) (1 children)

Any idea why they went with an open prop vs a ducted fan?

edit: the motors are 600mm diameter, so not easy to install in the duct is my guess. It's impossible to package an inboard configuration on such small airframes.

[–] [email protected] 2 points 6 days ago

Most brooms are sold with a dustpan attached.

 

Hurricane Helene crushed my 38" mower, and it just barely fit in the bed of my 93 Ranger. My options now are the dumpy looking disposable 30" riders, a 42" that won't fit in the truck, or a push mower that I'm too lazy to walk behind. I've decided that a single blade larger than 30" must be impractical because the spindles can't handle the Mandingo of a blade, and dual blades smaller than 42" total must be too many RPMs to hit target tip speed.

Insurance is paying for it, but I want something that fits in the truck. Any ideas?

1
submitted 1 year ago* (last edited 1 year ago) by [email protected] to c/[email protected]
 

From the release notes- Fixed the bug that that multicast acceleration caused VLAN data forwarding errors.

I was having problems with Google home starting a multicast flood. Opened a ticket with TPLink, and 3 weeks later it's fixed!

I could power down the GH with the offending IP address and the flood would continue. Unplugging the EAP wouldn't always fix it either. I did some wiresharking and sent them diags, and they recreated the bug and squashed it!

 

So I've seen the TP-Link and GL.inet travel routers, and it looks like some of the GLs are/were built to run wrt firmwares. Stock TP firmwares have been pretty full features in my experience. I really want USB-C power. The GL wireguard support looks useful too, but it looks like their newer stuff is proprietary? Another want, not need, is 5 GHz band.

Does anyone have a favorite model or another board that can be flashed?

 

I'm working in the template editor, and if I use the 'and' operator, an entity disappears. I finally found/guessed a working combination but I can't find any examples to see the right combo of operators and parenthesis. HA tells you to look at jinja docs, jinja literally says "There is not an awful lot to talk about here"

any template guru out there know the secret sauce?

14
submitted 2 years ago* (last edited 2 years ago) by [email protected] to c/[email protected]
 

I'd asked about using a VPS to get better routing to my homelab in this post: https://lemmy.world/post/1424540

I've narrowed down my problem- if i use a subdomain in my caddyfile, performance is 1/3 or worse compared to just the root.

example.com {reverse_proxy 192.168.1.57}

will saturate my gigabit lan connection at 980ish. On a 5gUW connection i get my advertised 50 mbit or more

librespeed.example.com {reverse_proxy 192.168.1.57}

I get 220-250 megabits on my internal lan. The same 5gUW connection will only get 7 or 8 mbit.

It's strange to me that everything seems to work just fine, but it's just slow. Anyone got any ideas?

 

I've got 1000/50 service from a mid-size ISP. It's pretty consistent- any time I run a speed test from home, it will hit those numbers. I have an opnsense plugin checking twice a day.

Performance from my self-hosted services to the internet, however, is very inconsistent. Sometimes I get the full 50, sometimes it will only hit 5 Mbit/s.

Is it possible a VPS proxy could provide less congested routes? Is there a better way to troubleshoot the bottleneck? When i notice a slowdown, usually watching a clip on frigate, I'll use a public speedtest to check my field connection. If it's over 50 down, I'll check librespeed on my server. If frigate or plex is fast, librespeed will be too. If I've noticed a problem, librespeed has always agreed.

My host machine is a 5700g w/ 64 gigs of ram, X520 nic to an S33 modem, so I don't think it's a hardware bottleneck.

view more: next ›