I agree. I chose not to go with the P1S because of Bambu's proprietary nature. I don't NEED to SSH into my printer or mess around in the internals, but it's nice to have that option, especially once a manufacturer moves on from an old model. It would be ideal to have community support once that happens. I went with the Qidi X-Plus 3 because of build volume and price too, not just openness, but aside from Bambu's wireless printing for some reason requiring data to go through their cloud I've only heard good things. I think this move to allow third party firmware is very smart and will draw more of the maker market, not just the average consumer.
darkstar
joined 2 years ago
There's a lot that goes into the print speed, including volumetric flow (measured in mm^3/s) and minimum layer time, used for allowing layers to cool enough before printing the next one so the print doesn't end up a blob. You want to slice the object and then look at where the speed changes in the preview. That will give you an idea of what's happening. It could also be down to the settings Cura uses for PETG.
I've been a software engineer for the last 17 years, with the last 11 years having been in management. The further people get in their career the easier it is to forget to stay humble. You can't always be the smartest person in the room. It's statistically unlikely. One of my favorite books I've read is "The Secret: What Great Leaders Know and Do" (not to be confused with "The Secret"). The book covers how you can stay humble in your career, reinvent yourself, value the contributions of others, etc. The fact is that even if you end up in a leadership position, you won't necessarily be the smartest person in the room. Even if you made a great decision for the team years ago, that may not hold up now. Be open to the fact that you're wrong. Be open to change. If you can't do that then you're going to end up set aside as a dinosaur. Adapt. If you don't then you'll be left behind. And be kind, because you never know who you'll work with again. Being smart isn't carte blanche to be an asshole to anyone who isn't as smart as you. You'll likely need them at some point if you stick around long enough.
It makes perfect sense. It's about control by any means. The fact of the matter is that, by definition, conservatives don't want progress. They'll say and do anything to stand in the way of progress, even if it's contradictory.
It's annoying to me that sometimes I have to use Reddit because the only answer I can find to a problem I'm having is in a Reddit post or comment. I would prefer to never use it again, but I'll settle for only using it when strictly necessary.
You say you're not going to pay for Qidi's Rapido PLA, but man is it a solid and consistent filament. I've tried Elegoo's Rapid PLA+ and PolyMatter's PolyTerra (which, in fairness, is a very different filament) and neither holds a candle to the Qidi Rapido PLA. Prints end up surprisingly smooth, and I've had very few failures. The PolyTerra is matte, so the end result's layer lines are almost unnoticeable, but has to be printed SO MUCH SLOWER, and has to be printed cooler or it curls AND sticks too much to the build plate. The Elegoo Rapid PLA and Rapid PLA+ are okay, but just not as smooth as either of the other two.
While Qidi's Rapido PLA is expensive for one spool, they have surprisingly steep discounts when you buy more, and the price can easily come down to about $20/kg as a result. If I wasn't trying to only use recycled filament, I'd probably only print with the Rapido PLA since it took no dialing in. It just worked. Meanwhile, I've had to tune parameters for the others and have thrown away a fair amount of plastic as a result. I'd love if Qidi sold a recycled filament that could be printed even half as fast as the Rapido PLA, I'd probably be all over it.
If your manager is a good manager, then nothing that comes up in your review should be a surprise. Talk about a plan to get to the next level. Nothing will ever be guaranteed, but if you work together on a plan and have milestones to meet then you'll have a better chance of getting a raise and promotion. Obviously, not every review cycle can include a raise or promotion, so be reasonable.
A good review has what are called SMART goals. They should be specific, measurable, achievable, relevant, and time-based. If your manager fails to give you goals that meet that criteria, then chances are you aren't both working toward the same thing. Be open to criticism, because you probably won't be doing everything well. Make sure you're having regular one-on-ones with your manager, or whoever gauges your progress. If you're early in your career, I would recommend every week, or every two weeks at most. This way you have regular feedback. Make sure you take notes.
Jirard's words were unambiguous over the years, though. It was always "we're working with..." or "we've donated to..." and not "we're looking at these charities". I don't know what the rationale for hanging on to that money was, whether it was for the right reasons or not. What I do know is that people were lied to. It doesn't matter if he intended to or not. It's not a good spot to be in, and I can't imagine it gets much better from here. The whole thing felt very much like w crypto scam, except the money was still available, but there was a whole lot of "trust me, bro" and misrepresentation of what was happening behind the scenes.
How many years of research do you need in order to pick the charity or university you want to fund? How many times do you repeat the lies (with numbers!) without even knowing what your own charity is doing? I wouldn't be surprised if there was a different reason they hung on to the money, because this doesn't pass the sniff test. Where there's smoke there's fire.
I also like tools like Honey or CamelCamelCamel, which show you the actual price changes over time, and you can decide when the right time to buy is. Obviously, you never know when something will go on sale in the future, but it at least helps you see how good the current price is compared to the past month or year.
I just bought an Elegoo Neptune 4 Pro, and its semi-automatic bed leveling is great. I'd say getting anything with automatic or semi-automatic bed leveling would be a huge time saver.
Are you sure what you got was good quality? I find Massachusetts to have the best quality stuff near me. I've purchased from New Jersey, but have questioned the quality on occasion. Once it was bad enough that I felt pretty off for a while, and felt like I was going to pass out, but ultimately didn't. A couple of other times I've been stoned and just got light headed when I stood up, but that could also just be chalked up to getting up too quickly or not hydrating enough, and might've happened with or without weed.
It's possible weed just doesn't agree with you, or a certain strain. From your other comments your doctor told you not to smoke when you brought it up. None of us should contradict your doctor's advice, but if you're not going to listen to that, then I'd at least suggest getting a second opinion.
"Research". I don't think this word means what you think it means.