VinS

joined 2 years ago
[–] VinS@sh.itjust.works 2 points 1 week ago* (last edited 1 week ago)

Klipper can have a webserver/api/front-end client. So you should be able to plug everything back to HomeAssistant (if Sovol let it open). On the Prusa Side, I'm not sure that their firmware is that open to be able to plug it to HA, but they have their own system that let you do the same.

My feeling (didn't used the SV08) is that's another ender like printer that you need to tinker to make it work and when you want to go another step-up you start to change parts (motherboard, extruder, etc). The Prusa is an already complete machine. On the proprietary side theirs Bambulabs printers too, I think Quidi have a bunch too. Lot and lot of choice :p

Speed is not everything, better have 3 printers than a fast one. A bit like cars, speed -> expensive -> more pricey to maintain (time and/or money)

[–] VinS@sh.itjust.works 4 points 1 week ago (4 children)

The review from The Canuck Creator of the SV08 was not awesome. They may have fixed those issues.

Can you explain a bit more your context, what you are looking for, tinkering or not, internet mandatory, opensource, etc...

We have one mk4 in our Hackerspace, 4 x MK3 and 1 x XL. The MK4 just churn out parts from various inexperienced people and seeing more usage than any other machines without failing. All the parts are available to reprint if needed. It's a good choice BUT it's expensive and you may want something else.

I have 2 Vorons at home, works good for me but too complex for my wife to launch a print by herself. So she is more confident to print at the Hackerspace.

There's a variety of printers but without knowing more about you, it's hard to recommand something

[–] VinS@sh.itjust.works 7 points 1 month ago (2 children)

Does a simple file not good? Missing the "not read by anyone" So you need a lock/encryption on it?

[–] VinS@sh.itjust.works 10 points 1 month ago (4 children)

What are you looking for features? A Simple text editor and saving as markdown is not good enough? Can save it in a cloud host.

[–] VinS@sh.itjust.works 7 points 1 month ago (1 children)

I have just 0 problems with pei. Powder coated pei are the best. Tried garolite but not enough benefits for my usage.

[–] VinS@sh.itjust.works 9 points 1 month ago

I thought that you had to pay a fee every year, even for free apps. Something around 100$. Compared to a website, I think that for hosting a static file in a CDN it's already pretty expensive for most free apps developers.

[–] VinS@sh.itjust.works 28 points 2 months ago (1 children)

Biggest round of cuts since... two years go... So it's not exceptional.

[–] VinS@sh.itjust.works 7 points 2 months ago

Or you buy a kit from a reputable brand

[–] VinS@sh.itjust.works 1 points 2 months ago* (last edited 2 months ago)

Heat soak should not change what you have here. During the heat soak, machine expands a little. You will get a more usefull Z / mesh when the machine gets to equilibrium.

If you still have problems after that, it's probably a X twisted, see the linked document above. Unfortunately I do not have much time to dig into your configs.

I don't have any experience with beacon. I use Tap or Klicky. With a twisted X, as tap use the nozzle, it should work even with a twisted X

[–] VinS@sh.itjust.works 2 points 3 months ago* (last edited 3 months ago) (2 children)

You have a lot of possible options here.

  • Your bed is ok, mine is 0.6 variation (sad I know)
  1. dish soap with no additives, rinse and dry it correctly before installing it back
  2. Verify that it's doing this in the good order :
  • Pre-heat bed
  • Home XYZ
  • Bed leveling
  • Re home Z
  • Bed Mesh
  • Start print

If everything is ok, as someone else said, it's maybe a X twist -> https://docs.vorondesign.com/community/troubleshooting/bryansj/twisted_x_extrusion_diagnostics.html

[–] VinS@sh.itjust.works 1 points 3 months ago
[–] VinS@sh.itjust.works 1 points 3 months ago (2 children)

Hi there, using intellij but I can't seem to find an Ai code review, what tools are you using?

 

Hi there,

I'm a dev and use basic mechanical keyboards (tkl corsair quick fire). For a while now I'm operating in qwerty us layout but I reversed the numbers with the special characters because I use them more often than numbers. Any of you know where I could find this? CherryMX keycaps.

I don't want to go on the more dvoraky dev layouts because I think more than I type during my day.

Thanks a lot ❤️

69
submitted 1 year ago* (last edited 1 year ago) by VinS@sh.itjust.works to c/piracy
 

Hi there,

I use a Jellyfin server to host my own movies and trying to think about doing the same about music. The problem is that I watch roughly one movie a week but a lot more of music (all day long). For now I'm mainly using sp0tify but the UI is worse and worse, constantly asking for more money.

I don't care much about my playlists but I'd need to start a list of the groups I listen to, probably around 200/300 ones on "random".

I'd be curious how you started you transition / technical one too.

Thanks

Edit: wow Thanks a lot for the great advices. I already have a tailscale + Jellyfin so I will probably start there with symfonium. For the download I will give soulseek a go.

view more: next ›