What are you talking about? When MS had the only image AI in the game, it was garbage and couldn't do anything useful. Of course no one was threatened.
But after researchers got their hands on nVidia 3000 series cards, and finally had access to hardware.
More advanced research papers started spilling out, which has caused this crazy leap in AI tech.
Now the image/audio AI is advanced enough to be useful, hence now the threats..
Evil Dead / Army of Darkness
Car Charger wouldn't be an intermittent load,
Eric the Viking. (lots of the Monty Python crew)
ahh yes... "accidentally"
Alright, well then I wouldn't rule out a very loose connection at the thermistor then.
I'd probably test the thermistor's reading with no steppers active. (unplug them if you have to)
If signal is still noisy, pull the thermistor out and test. (possibly replace thermisitor)
If it's not noisy, move the hotend around with the steppers off and see if it gets noisy with motion. go back to 2
If it's still not noisy, it's definitely EMF from the steppers, and you'll need to replace the wire to the sensor. ideally with shielded wire and try not to run it along the same path as the stepper wires.
Sorry, I'm a little confused.
So you attempted to replace the nozzle or the hotend at first?
and when you had a problem you replaced the hotend?
2400W x number of occupants is still some series draw on their main panel.
Their point still stands that their mains would need an upgrade.
replaced it why?
With the exact same hotend?
Any changes to wiring? connectors?
ಠ_ಠ that thumbnail...
Did it work? How long did it last?