PixeIOrange

It looks correct in the slicer. I changed the slicer btw and with cura everything works fine. So its something in PrusaSlicer. Will test some more today.

Immerhin wiederaufladbar! Man muss dankbar für die kleinen Dinge sein.

In the first photo the outter perimeters were completely print and the inner started to print. The outer perimeter from the first tooth is missing, so theres only the inner one. In PrusaSlicer the perimeters are correct, the nozzle moves correctly but no filament is coming out. It begins with the second tooth. I let the nozzle draw 5 lines prior to the printing so the pressure in the hot end is correct. I guess its a retraction issue, maybe the slicer retraction settings are ignored by the firmware, ill look into that tomorrow.

Anyways, here a picture of the first layer:

I guess i havent described the problem good enough. See updated post.

I canceled the print. Its only the first tooth thats not printed correctly.

Ich glaub, da steckt viel Frust einer gescheiterten konservativen Erziehung hinter. Schwurbeleien sind da nur ein Ventil für.

Jürgen

Richtig

Na den Deppen-Binde-Strich damit die Bild-Leser komplexe Wort-Kreationen besser lesen können.

Und den Deppen-Bindestrich nicht vergessen.

Is not if not nothing else is to do then yes. Otherwise no.

Edit: forgot an also.

CEO doing CEO things...